Dynex PF1300 and
PF4300 Series hydraulic pumps are approved for use with various water glycol
fluids. This makes them ideal for use in the oil & gas industry, for
offshore applications on wellhead safety control systems and subsea systems.
- Pressures to
15 000 psi (1040 bar).
-
Single-fluid design
prevents cross-contamination.
-
No lubrication
circuit required.
-
Corrosion resistant
design.
- Half the size,
weight and cost of a triplex or plunger pump.
Pumps for
Panel Systems
PF500 Series mineral
oil pumps can be used in remote oil field locations around the world. The checkball design
provides long life in adverse conditions.
- Pressures to
15 000 psi (1040 bar).
- Low input power
requirements.
- Ideal for
locations with limited power supply.
Components
for Power Packs
Dynex
high-pressure hydraulic pumps and valves are ideal on portable power packs
for high-torque wrenches and other oil field service tools.
- PF500 hydraulic
pumps operate to 15 000 psi (1040 bar).
-
Multiple outlet pumps
are ideal for circuits with changing flow and pressure requirements.
- Spool valves,
rated to 10 000 psi (700 bar), provide simple four-way control in high
pressure systems
- Seated valves are
rated to 15 000 psi (1040 bar).
Valves for
Hazardous Areas
Dynex
hydraulic valves with "explosion proof" solenoids are approved by "UL" and
"CSA" for use in hazardous locations. Valves are also available with air
or oil operators.
|
|
![Pumps for water glycol fluid in offshore wellhead safety control systems](http://www.dynexhydraulics.com/pf4300.jpg)
In checkball pumps,
internal bearing lubrication is provided by the water glycol. This
eliminates cross-fluid contamination, which may occur in other pump
designs requiring a secondary oil for lubrication.
![Mineral oi pumps for oil & gas safety control panel systems](http://www.dynexhydraulics.com/pf500b.jpg)
PF500
Series hydraulic pumps require input power requirements as low as 1.0 HP
at 10 000 psi (0.7 kW at 700 bar) and 1800 rpm.
![Typical circuit with multiple-outlet pumps for portable power packs for oil field tools](http://www.dynexhydraulics.com/hilocir2.gif)
Split-Flow®
hydraulic pumps
can provide multiple outputs for tool circuits. The combined flow from
both outlets can rapidly advance the tool. Then, the low flow from one
outlet is supplied at high pressure for the high-torque functions.
|