Dynex
provides pumps for use with special fluids including a variety of
water-based, fire resistant and others. The properties of these special
fluids include a combination of high or low viscosity with either high or
low lubricity.
Various pump models are available for use with water glycol, Viscor and
other diesel calibration fluids, Skydrol and other phosphate ester fluids,
machining coolant, brake fluid, and various military fluids.
Dynex
hydraulic pumps operate within a wide range of recommended viscosities
from 31.6 to 3,142 SUS (1,5 to 680 cSt).
Special fluid
applications include:
-
Wellhead Safety
Control Systems
-
Blowout Preventer
(BOP) Systems
-
Diesel Calibration
Testing
-
Hydrostatic Roll
Balance Systems
-
Lubrication Systems
-
Hydraulic
Test-Stands
- Ground Support
Equipment
-
Industrial Coolant
Supply Systems
- Hydroform Presses
Learn more about
Why Checkball Pumps Work Better with special fluids.
|
|
Dynex
pump models are available for use with water glycol, Skydrol and other
phosphate ester fluids, Viscor and other diesel calibration fluids, and
various military fluids. |
Fluid Compatibility List
Various pump models
are compatible with a variety of special fluids. Because many conditions
affect successful operation, contact the Dynex sales department for
a review of your application using any of these special fluids.
This is a partial list
which is updated regularly. Not all compatible fluids are shown here.
Water Glycol
|
|
ACT FR WG 200-D |
|
Castrol Transaqua
HT |
|
Citgo Glycol FR-40
XD |
|
Citgo Glycol
FR-5046 HP |
|
Houghto-safe 419
|
|
Houghto-safe 620
|
|
Houghton Aqualink
300 |
|
Houghton Aqualink
HT-804 |
|
Oceanic HW443
|
|
Oceanic HW525 |
|
Oceanic HW540 |
|
Oceanic HW625 |
|
Oceanic HW640 |
|
Oceanic HW740 |
|
Ucon Hydrolube
HP-5046 |
Other
Water-Based Fluids |
|
95-5 Fluid
|
Diesel
Calibration Fluids |
|
Viscor |
Phosphate Ester |
|
Brake Fluids
|
|
Skydrol Fluids
|
Military Fluids |
|
MIL-C-7024C Type
II (Stoddard solvent) |
|
MIL-H-46170 |
|
MIL-H-5606 |
|
MIL-H-6083 |
|
MIL-H-83282 |
Other Synthetic
Fluids |
|
Isopar Solvents |
|
Quintolubric 822 (Polyol
ester) |
Machining
Coolant |
|
Milicron Cimtech
310 |
|
Castrol Ilocut 334 |
|
|
Checkball pumps feature a single fluid design, with internal bearing
lubrication provided by the pumped fluid. This design eliminates the
potential for cross contamination, which may occur in other pump designs
requiring a secondary fluid for lubrication.
Dynex
special fluid pumps have been qualified for water glycol fluids including
Marston Bentley Oceanic HW443 and HW740 fluids at 10 000 psi (700 bar).
PF4300
Series pumps are suitable for water-based fluids including water glycol.
These pumps operate at maximum pressures from 10 000 to 15 000 psi (700 to
1040 bar). Learn more
about water glycol pumps.
|